C
Optical Connector Cleaning
In this appendix:
C.1
LC End Surface Cleaning
C.2
End Surface Cleaning In LC
Danger:
Never look into the end of a fiber-optic cable. Permanent
eye damage or blindness can occur very quickly if the laser light is
present. Follow local safety precautions regarding fiber.
Danger:
Ne regardez jamais dans l'extrémité d'un câble à fibre
optique. Des lésions oculaires permanentes ou la cécité peuvent
survenir très rapidement si la lumière laser est présente. Suivez les
précautions de sécurité locales concernant la fibre.
Danger:
Never handle exposed fiber with bare hands or touch it to
base skin. Fiber fragments can enter the skin and are difficult to
detect and remove.
Danger:
Ne manipulez jamais la fibre exposée à mains nues et ne la
touchez jamais à la peau de base. Des fragments de fibre peuvent
entrer la peau et sont difficiles à détecter et à éliminer.
Caution:
Clean the optical connector before inserting and after
removal.
Attention:
Nettoyez le connecteur optique avant de l'insérer et
après son retrait.
The RU has one optical interface used for the eCPRI port with an installed SFP module. Refer to
LC End Surface
Cleaning
and
End Surface Cleaning In LC
for information on cleaning the optical connector end surface.
Reel-type cleaners can be used for LC connector ferrule end surface cleaning.
Important:
Follow local safety precautions and guidelines regarding fiber optical connector cleaning.
Figure 65
Reel-type Cleaner Tool (Closed)
Optical Connector Cleaning
173
Release 1.0
·
Issue 1.1, May 2021
Fujitsu and Fujitsu Customer Use Only