1. Introduction
The Fujitsu CPU369-Modul is a low cost multifunctional evaluation board for Fujitsu’s 32-Bit Flash
microcontroller MB91F369 that makes it easy to evaluate and demonstrate almost all features of the
microcontroller. It can be used stand alone for software development and testing as a simple target board. It
gives you the possibility to develop and evaluate applications with devices of the new embedded-graphic-
controller family. Its modular concept makes it available to use one of several graphic device subboards
just by plugging them to the CPU board.
The board allows the designer immediately to start the software development and perform debugging
before his own final target system is available.
2. Features
•
MCU MB91F369
•
2MB external Debugging RAM
•
4MHz crystal
•
DC Power supply circuit (incl. testpins for VCC, GND, power LED and switch)
•
1 MB external Flash available for user code and constant data
•
External Reset Button for MCU
•
2 Buttons for ext. Interrupt (USER_0 = ext. Interrupt0, USER_1 = ext. Interrupt1)
•
DB9 (female) connector for internal UART
•
CAN transceiver and DB9 (male) for internal CAN0
•
2 LEDs (on Port N)
•
All peripheral pins are available by the connectors ‘Peripheral_1’ and ‘Peripheral_2’
•
Graphic controller interface
5
Summary of Contents for CPU369-Module
Page 12: ...5 Schematics and Drawings 12 ...
