Installing/removing main memory
English - 7
Installing/removing main memory
Technical data
Technology
DDR3 1066 / 1333 MHz unbuffered DIMM modules 240 pin; 1.5 V;
64 bit without ECC
Total size
1 to 32 GByte DDR3
Module size
1, 2, 4 or 8 GByte for one module
At least one memory module must be installed. Memory modules with different
memory capacities can be combined.
You may use only unbuffered DDR3 memory modules without ECC.
DDR3 memory modules must comply with the PC3-8500 or PC3-10600 speci
fi
cation.
If you use more than one memory module, then make sure to distribute the
memory modules over both memory channels. By doing this you use the
performance advantages of the dual-channel mode.
Maximum system performance is achieved when identical memory modules
are used in Channel A and Channel B.
To simplify equipping, the slots are colour coded.
Depending on how the system is con
fi
gured, the visible main memory can be reduced.
Module 2 Channel B
Module 4 Channel B
Module 1 Channel A
Module 3 Channel A
Number of memory modules inserted
Slot to be used
1
2
3
4
Channel A, slot 1
x
x
x
x
Channel B, slot 2
x
x
x
Channel A, slot 3
x
x
Channel B, Slot 4
x
The installation/removal is described in the "Basic information on mainboard" manual.
Fujitsu Technology Solutions
19
Summary of Contents for D3071
Page 1: ...Mainboard Short Description Mainboard D3071 ...
Page 3: ......
Page 7: ...Mainboard D3071 First time setup Deutsch 5 English 13 ...
Page 8: ......
