Troubleshooting
These troubleshooting instructions are meant to eliminate
interruptions of use caused by possible easy-to-find defects (loose
connector, for example). Also, see the troubleshooting section in
your computer's documentation.
Problem
What to do
Blank screen
If the power LED is not lit, push the power
switch to turn the display unit on
.
If the
display unit is powered through the computer,
check that the computer is switched on.
The display unit might be in standby position.
Push one of the keyboard keys. Check that the
keyboard is properly connected to the
computer.
Check that the power cable is correctly
connected to the display unit and to the power
outlet. Use a desk lamp, for example, to check
that current is connected to a power outlet.
Switch off the display unit and the computer.
Unplug the display unit from the power outlet
for about one minute. Restart.
Error message
"No signal"
Check that the signal cable connector is
properly connected and that the connection
pins are not bent or damaged. If the connector
is loose, tighten the connector's screws.
Continued...
English print original
July 1997
Fujitsu e213
MNä
English
18
main2.chp
Fri Aug 08 12:48:05 1997
Color profile: Disabled
Composite Default screen