Chapter 3 Configuration Settings and Display
3.3 RAID Group Management > delete eco-schedule
ETERNUS CLI User’s Guide
Copyright 2015 FUJITSU LIMITED
P2X0-1030-09ENZ0
137
delete eco-schedule
This command deletes an ECO schedule(s) or a single ECO schedule event. One or more ECO schedules can be
deleted at the same time. Only one ECO schedule event can be deleted at the same time.
■
Syntax
■
Parameter
■
Example(s)
delete eco-schedule {-schedule-number
schedule_numbers
| -schedule-name
schedule_names
}
[-event-number {1|2|3|4|5|6|7|8}]
-schedule-number
or
-schedule-name
This parameter specifies the ECO schedule identifier. One or more parameters can be specified.
However; if an event-number is also specified, then only one ECO schedule identifier can be
specified. For details, refer to
"1.2.13 ECO Schedule Syntax" (page 25)
.
-event-number
Optional. This parameter specifies the ECO schedule event number to be deleted. The ECO
schedule event number is a value from 1 to 8 and can be displayed by using the "show eco-
schedule" command. Only one event number can be specified. If the event-number is omitted,
the ECO schedule is deleted.
The following example will delete the ECO schedule named "SC002":
CLI> delete eco-schedule -schedule-name SC002
The following example will delete ECO schedule event #2 in the ECO schedule named "SC001":
CLI> delete eco-schedule -schedule-name SC001 -event-number 2
The following example will delete both the ECO schedule named "SC002" and "SC003" at the same time:
CLI> delete eco-schedule -schedule-name SC002,SC003
Summary of Contents for Eternus DX410 S2
Page 2: ...This page is intentionally left blank ...
Page 756: ......
