Chapter 3 Configuration Settings and Display
3.4 Volume Management > set flexible-tier-volume
ETERNUS CLI User’s Guide
Copyright 2015 FUJITSU LIMITED
P2X0-1030-09ENZ0
178
set flexible-tier-volume
This command modifies the information for the Flexible Tier Volumes (FTVs) that are already registered in the
ETERNUS DX Disk storage system.
■
Syntax
■
Parameter
■
Example(s)
set flexible-tier-volume {-volume-number
volume_number
| -volume-name
volume_name
}
[-name
name
] [-priority {
ftsp_number
|auto}] [-attention
attention
] [-copy-protection {enable | disable}]
-volume-number
or
-volume-name
This parameter specifies the FTV identifier for which the settings are to be changed. Only one
parameter can be specified in a single command. For details, refer to
.
-name
Optional. This parameter specifies the new name of the target FTV. For details, refer to
. If omitted, the alias name of the target FTV remains
unchanged.
-priority
Optional. This parameter specifies the FTRP number of the Flexible Tier Sub Pool (FTSP) to
which the target FTV is preferentially allocated.
If "auto" is specified for this parameter, the allocated FTSP is determined automatically. If
omitted, this parameter is not changed.
-attention
Optional. This parameter specifies the threshold (Caution) for the target FTV. A value between
1% and 200% can be set. If omitted, this parameter is not changed.
-copy-protection
Optional. This parameter prevents the FTV from being specified as the copy destination. When
"enable" is specified, the target FTV cannot be specified as the copy destination. When
"disable" is specified, the target FTV can be specified as the copy destination. If omitted, the
setting remains unchanged.
enable
The FTV is protected.
disable
The FTV is not protected.
The following example renames an FTV named "FTV0003" to "FTV_0003":
CLI> set flexible-tier-volume -volume-name FTV0003 -name FTV_0003
Summary of Contents for Eternus DX410 S2
Page 2: ...This page is intentionally left blank ...
Page 756: ......
