Chapter 3 Configuration Settings and Display
3.5 Host Interface Management > release host-affinity
ETERNUS CLI User’s Guide
Copyright 2015 FUJITSU LIMITED
P2X0-1030-09ENZ0
277
release host-affinity
This command releases the associated affinity groups from the host identifiers. This command cannot be used
when Host Affinity Mode is disabled for the host interface port.
■
Syntax
■
Parameter
release host-affinity
{ -port {
xyz
[-host-number
host_numbers
| -host-name
host_names
] | all} |
{-port-group-number
port_group_number
| -port-group-name
port_group_name
}
{-host-group-number
host_group_number
| -host-group-name
host_group_name
}
}
-port
This parameter specifies the host interface ports to be released. Two or more parameters can
be specified by separating them with a comma.
Example: -port 000,100
For details, refer to
"1.2.14 Host Interface Port Syntax" (page 25)
.
If this parameter is specified together with the host identifier, only the mapping definition for
the specified host identifiers is released.
xyz
"x" is the controller module (CM) number, "y" is the CA number, and "z" is the host port
number.
Example: "123" indicates CM#1-CA#2- Host port#3
all
All the host interface ports
The settings for all of the ports are released. When this parameter is specified, the "-
host-number" or "-host-name" parameter cannot be specified.
-host-number
or
-host-name
Optional. This parameter specifies the host identifiers that are released from the host identifi-
ers of the specified host interface port. One or more parameters can be specified at the same
time. If omitted, all definitions of the specified host interface ports are released.
-port-group-number
or
-port-group-name
This parameter specifies the port group number or the port group name. Only one port group
can be specified at the same time. For details, refer to
"1.2.15 Port Group Syntax" (page 26)
-host-group-number
or
-host-group-name
This parameter specifies the host group number or the host group name. Only one host group
can be specified at the same time. For details, refer to
Summary of Contents for Eternus DX410 S2
Page 2: ...This page is intentionally left blank ...
Page 756: ......
