Chapter 3 Configuration Settings and Display
3.5 Host Interface Management > set host-lu-qos
ETERNUS CLI User’s Guide
Copyright 2015 FUJITSU LIMITED
P2X0-1030-09ENZ0
334
set host-lu-qos
This command performs detailed settings for the Host-LU QoS function. This command can change the QoS
settings for Port QoS, Host QoS, and LU QoS.
■
Syntax
■
Parameter
set host-lu-qos -mode {port-qos|host-qos|lu-qos}
{-port {
xyz
|all} [-bandwidth-limit
bandwidth-limits
] [-event-number
event-numbers
]
[-schedule-number
schedule-numbers
]}
{-host-type {fc|iscsi|sas} {-host-number
host_numbers
| -host-name
host_names
}
[-bandwidth-limit
bandwidth-limits
] [-event-number
event-numbers
]
[-schedule-number
schedule-numbers
]}
{-port
xyz
[{-host-number
host_numbers
| -host-name
host_names
}]
[-lu-qos-group
lu_qos_group_numbers
] [-event-number
event_numbers
]
[-schedule-number
schedule_numbers
]}
-mode
This parameter specifies which QoS settings are changed.
port-qos
Port QoS
host-qos
Host QoS
lu-qos
LU QoS
-port
This parameter specifies the host interface port when Port QoS or LU QoS is set.
Example: -port 00
For details, refer to
"1.2.14 Host Interface Port Syntax" (page 25)
.
•
When "lu-qos" is specified for the "-mode" parameter, "all" cannot be specified.
•
When "lu-qos" is specified for the "-mode" parameter, the type (FC, iSCSI, SAS) of all the
ports that are specified by the "-host-number" or "-host-name" parameter must be the
same.
Summary of Contents for Eternus DX410 S2
Page 2: ...This page is intentionally left blank ...
Page 756: ......
