Chapter 4 Function/System Settings and Display
4.1 User Management > show radius
ETERNUS CLI User’s Guide
Copyright 2015 FUJITSU LIMITED
P2X0-1030-09ENZ0
377
■
Example(s)
The following example displays the settings of the RADIUS authentication servers:
CLI> show radius
RADIUS authentication [Enable]
After error [No]
Primary server [10.21.134.198]
Primary port [MNT]
Primary port number [1812]
Primary authentication mode [CHAP]
Primary shared secret [xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx]
Primary retry timeout [20]
Secondary server [10.17.80.6]
Secondary lan port [RMT]
Secondary port number [1912]
Secondary authentication mode [PAP]
Secondary shared secret [yyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyy]
Secondary retry timeout [20]
The following example shows when the secondary server is not valid.
CLI> show radius
RADIUS authentication [Enable]
After error [No]
Primary server [10.21.134.198]
Primary port [MNT]
Primary port number [1812]
Primary authentication mode [CHAP]
Primary shared secret [xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx]
Primary retry timeout [20]
Secondary server [-]
Secondary lan port [RMT]
Secondary port number [1912]
Secondary authentication mode [PAP]
Secondary shared secret [yyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyy]
Secondary retry timeout [20]
The following example shows when RADIUS authentication is disabled.
CLI> show radius
RADIUS authentication [Disable]
After error [No]
Primary server [10.21.134.198]
Primary port [MNT]
Primary port number [1812]
Primary authentication mode [CHAP]
Primary shared secret [xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx]
Primary retry timeout [20]
Secondary server [-]
Secondary port [RMT]
Secondary port number [1912]
Secondary authentication mode [PAP]
Secondary shared secret [yyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyy]
Secondary retry timeout [20]
Summary of Contents for Eternus DX410 S2
Page 2: ...This page is intentionally left blank ...
Page 756: ......
