Chapter 4 Function/System Settings and Display
4.2 Advanced Copy Management > start advanced-copy
ETERNUS CLI User’s Guide
Copyright 2015 FUJITSU LIMITED
P2X0-1030-09ENZ0
399
start advanced-copy
This command starts an Advanced Copy session. All other Copy types cannot be started using this
command.
■
Syntax
■
Parameter
■
Example(s)
start advanced-copy
{-source-volume-number
volume_number
| -source-volume-name
volume_name
}
{-destination-volume-number
sdv_number
| -destination-volume-name
sdv_name
}
-source-volume-number
or
-source-volume-name
This parameter specifies the volume identifier of the copy source. The type must be OPEN.
Only one volume can be specified at the same time. For details, refer to
.
-destination-volume-number
or
-destination-volume-name
This parameter specifies the volume identifier of copy destination. The type must be SDV. Only
one volume can be specified at the same time. For details, refer to
.
The following example starts an Advanced Copy session from the volume named "OPEN1" to the volume
named "SDV1":
CLI> start advanced-copy -source-volume-name OPEN1 -destination-volume-name SDV1
Summary of Contents for Eternus DX410 S2
Page 2: ...This page is intentionally left blank ...
Page 756: ......
