Chapter 4 Function/System Settings and Display
4.2 Advanced Copy Management > show rec-path
ETERNUS CLI User’s Guide
Copyright 2015 FUJITSU LIMITED
P2X0-1030-09ENZ0
425
When the parameter is specified:
# Storage Information
# Local Box ID (Current Storage System) 00DXL#########ET06F21AUABCPJ000001######
A
# Remote Box ID 00DXL#########ET06F21AUABCPJ000000######
B
# Line Information
# Path type Switched
C
# Effective Line Speed 10 (Mbit/s)
D
# Round Trip Time 12 (ms)
E
# Current Multiplicity Auto
F
# Recommended Multiplicity 3
G
# Priority Level 1
H
# Copy schedule Mode Session balancing
I
# Path Information (to Remote Storage System)
# Local Port Status Remote Port WWN / iSCSI Name (IP Address)
# CM#0 CA#0 Port#0 Error [I C S O T] 500000E0D0C40006
J K L M
# CM#1 CA#1 Port#0 Normal irq.2010-12.com (FE80::290:CCFF:FEA4:3A49)
J K N
#Error detail description(s):
# R: The copy path between the local device and remote device is in unstable status.
# For example, link-down repeatedly occurs in a certain period of time or communication fails.
# B: The resolution settings are different between the local and remote devices.
# D: The copy path settings may be invalid.
# N: The error occurs in the remote device.
# T: The error occurs in the FC-RA port or iSCSI-RA port on the remote device.
# C: The error occurs in the cable.
# O: The error occurs in the local device or adapter other than the remote device.
# This occurs only when the connection type is FC-AL.
# S: The error occurs in the switch or switch settings.
# I: The error occurs in the FC-RA port or iSCSI-RA port on the local device.
# M: The error occurs in the memory.
O P
A:
Box ID of a local storage system
B:
Box ID of the specified remote storage system
C:
Connection form of a remote storage system registered in the system
D:
Effective line speed of a remote storage system registered in the system. A unit is Mbit/s.
E:
Round trip time of a remote storage system registered in the system. A unit is millisecond.
F:
Multiplicity of the remote storage system registered in the system
G:
Multiplicity recommended by the system. If the round trip time is "Unknown", "***" is displayed.
H:
Copy revel of a remote storage system registered in the system
I:
Copy Schedule Mode
J:
Host interface port number of the local storage system
K:
Indicates path status between the local storage system and the remote storage system. Error/Warn/Normal.
L:
Indicates error suspicious place or warn reason symbols
M:
World Wide Name (WWN) of FC-RA of the remote storage system
N:
iSCSI name and IP address of iSCSI-RA of the remote storage system
O:
Error suspicious place symbol.
P:
Detail description of the error suspicious place symbol. It will indicate when it appeared on J field.
Summary of Contents for Eternus DX410 S2
Page 2: ...This page is intentionally left blank ...
Page 756: ......
