Chapter 4 Function/System Settings and Display
4.4 Miscellaneous > set sed-key-group
ETERNUS CLI User’s Guide
Copyright 2015 FUJITSU LIMITED
P2X0-1030-09ENZ0
596
set sed-key-group
This command modifies the key group.
■
Syntax
■
Parameter
set sed-key-group [-name
name
] [-machine-group-name
machine_group_name
]
[-security-level {low | high}] [-recovery-mode {auto | manual}] [-period {
period
| ""}]
[-master-server-id {
master_server_id
| ""}] [-slave-server-id {
slave_server_id
| ""}]
-name
Optional. This parameter specifies the key group name. 1 to 32 alphanumeric characters and
underscores (_) can be specified. Only an alphabetical character can be specified as the first
letter. If omitted, the existing setting is not changed.
-machine-group-name
Optional. This parameter specifies the machine group name. Set the same name as the device
group name in the key server. 1 to 16 alphanumeric characters and underscores (_) can be
specified. Only an alphabetical character can be specified as the first letter. If omitted, the
existing setting is not changed.
-security-level
Optional. This parameter specifies the security level. If omitted, the existing setting is not
changed.
high
Rebuild or maintenance cannot be performed when communication with the key
server is not available during a disk failure or disk maintenance work in a RAID
group that uses the key group.
low
Rebuild or maintenance is performed using the common key when communica-
tion with the key server is not available during a disk failure or disk maintenance
work in a RAID group that uses the key group.
-recovery-mode
Optional. This parameter specifies whether to automatically perform recovery of a drive or a
RAID group that cannot be communicated with due to blockage of the key server when the
communication recovers. When "manual" is set, the recovery work is performed manually by
the user from Web GUI or CLI. If omitted, "auto" is set.
auto
Automatic recovery is performed.
manual
Automatic recovery is not performed.
-period
Optional. This parameter specifies the valid period of the key. This period can be specified on a
monthly basis by using a number from 1 to 12. Specify consecutive double quotations ("") or
omit this parameter to not set this period. If omitted, the existing setting is not changed.
-master-server-id
Optional. This parameter specifies the key server ID for the master server. 1 or 2 can be speci-
fied. When the master server is not used, specify consecutive double quotations (""). If omit-
ted, the existing setting is not changed. Use the same setting as the master server that is set
in the key server.
Summary of Contents for Eternus DX410 S2
Page 2: ...This page is intentionally left blank ...
Page 756: ......
