Chapter 5 Information Settings and Display
5.3 Maintenance > export log
ETERNUS CLI User’s Guide
Copyright 2015 FUJITSU LIMITED
P2X0-1030-09ENZ0
637
export log
This command exports the log files that are stored in the system to the specified FTP server.
■
Syntax
■
Parameter
export log -port {maintenance|remote | fst} -server
server_name
-user
login_user_account
-filename
filename
[-starting-time
YYYYMMDD-hhmmss
-ending-time
YYYYMMDD-hhmmss
|
-last-24h {enable|disable}] [-iom-log {enable | disable}] [-divide {no|4mb|1mb|640kb}]
[-customer-info {enable|disable}] [-indicator {enable | disable}]
-port
This parameter specifies which Ethernet port is used to connect to the FTP server. For details,
refer to
"1.11 Note for Specifying FTP Server" (page 31)
maintenance
MNT port
remote
RMT port
fst
FST port (not supported by the ETERNUS DX80 S2/DX90 S2)
-server
This parameter specifies the name of the FTP server that will receive the logs. The server name
format is IPv4 standard notation (a base 256 "d.d.d.d" string) or a fully qualified domain name
(FQDN).
Example: -server 192.168.1.20
Example: -server foo.bar
-user
This parameter specifies the user name that can access the FTP server. This command displays
a password prompt.
-filename
This parameter specifies the name of the log file to be stored on the FTP server. When logs are
divided and stored, the sequential number and the extension (.log) are automatically added
to the specified filename. If the same filename already exists, it is overwritten.
Example(s)
Example: Log is divided into two files if needed.
-filename /tmp/log
"/tmp/log01.log" and "/tmp/log02.log" will be created automatically.
Summary of Contents for Eternus DX410 S2
Page 2: ...This page is intentionally left blank ...
Page 756: ......
