manualshive.com logo in svg

Fujitsu Eternus DX410 S2, Cli User'S Manual

The Fujitsu Eternus DX410 S2 comes equipped with cutting-edge technology for data storage solutions. Easily navigate its advanced features with the comprehensive Cli User's Manual, available for free download from our website. Obtain optimal functionality and unleash the full potential of this remarkable product by referring to the user manual.

Share
Download
background image

Appendix A  Error Messages
    

ETERNUS CLI User’s Guide

Copyright 2015 FUJITSU LIMITED

P2X0-1030-09ENZ0

690

 

E0053

Remote server access failure.
This message indicates that the email notification cannot access the SMTP server. Use the "show network" 
command to check the remote server environment and the network environment. Use the "show email-
notification" command to check the email notification settings.

E0060

Resource locked.
The resource is being used by another session. Wait for a while and retry the command. If this error 
message continues to recur even after numerous command retries, a resource can be forcibly released by 
using the "set clienv-force-unlock" command (do not use this command while settings are being 
performed by another session of Web GUI, CLI, or monitoring software).

E0061

Lock was relinquished to another user.
The process privilege is taken by another user (GUI, CLI, or monitoring software). Wait for a while and try 
again.

E0070

Resource busy.
Resources corresponding to the specified parameter are used by another process. Check the working 
status of the resources identified in the details of this message.

E0071

Resource is linked to the other resource.
The specified parameter is associated with other resources. Confirm the associated status of the specified 
parameter (Example: host mappings, ECO definitions, etc.).
Release the association if necessary and try again. For example, host mappings can be released by using 
the "release host-affinity" command and/or the "release mapping" command, and Eco-mode definitions 
can be deleted by using the "release eco-raid-group" command.

E0072

Resource is temporarily insufficient.
Could not execute because the required resource is temporarily insufficient. Wait for a while and retry the 
command.

E0080

Resource limited.
A resource has reached its limit. Confirm the limit and the status of the specified parameter/function.

E0081

Number of active disks has reached the system limit.
Number of activated disks has reached the system limit (up to 120 disks can be used). Mixed 
configurations that include both 3.5" and 2.5" type disks are allowed.

E0089

Not available under current Advanced Copy usable mode conditions.
The current Advanced Copy mode does not permit this operation. Use the "show advanced-copy-
parameters" command to check the Advanced Copy usable mode.
The Advanced Copy usable mode can be canceled by using the "set advanced-copy-parameters" 
command if necessary.

E0090

Not available under current system status conditions.
The current system status does not permit this operation. Check the system status and the allowed 
execution conditions for the operation.

E0091

Not available under current SNMP settings.
The current SNMP mode does not permit this operation. Check the SNMP mode by using the "show snmp" 
command.
The SNMP mode can be changed by using the "set snmp" command if necessary.

E0092

Not available under current operation mode conditions.
The current operation mode does not permit this operation. Check the operation mode by using the 
"show enclosure-status" command.
The operation mode can be set by using the "start maintenance" command or canceled by using the "stop 
maintenance" command if necessary.

Message

number

Message

Countermeasure for the error 

Summary of Contents for Eternus DX410 S2





















































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for Eternus DX410 S2

NEC Univerge SV8100 Information Sheet preview
Univerge SV8100
Brand: NEC Pages: 2
D-Link Air DCS-1000W Setting-Up Manual preview
Air DCS-1000W
Brand: D-Link Pages: 13
D-Link DSL-2740B Installation Manual preview
DSL-2740B
Brand: D-Link Pages: 10
Makita 3606 Parts Breakdown preview
3606
Brand: Makita Pages: 2
Accelerated 6330-MX User Manual preview
6330-MX
Brand: Accelerated Pages: 10
Accelerated 6300-CX Customer Setup Instructions preview
6300-CX
Brand: Accelerated Pages: 4
Lantronix SLC 8000 Demo Manual preview
SLC 8000
Brand: Lantronix Pages: 10
Lantronix xport pro Integration Manual preview
xport pro
Brand: Lantronix Pages: 17
Lantronix PremierWave XC User Manual preview
PremierWave XC
Brand: Lantronix Pages: 109
Lantronix XPort Integration Manual preview
XPort
Brand: Lantronix Pages: 24
Lantronix WiPort Integration Manual preview
WiPort
Brand: Lantronix Pages: 29
Lanpro LP-N24 Installation Instructions preview
LP-N24
Brand: Lanpro Pages: 5
Lantronix XPress DR+ Quick Connect preview
XPress DR+
Brand: Lantronix Pages: 2
Aastra AXD Installation And Maintenance Manual preview
AXD
Brand: Aastra Pages: 502
IBM x3655 - System - 7985 User Manual preview
x3655 - System - 7985
Brand: IBM Pages: 118
OCZ Z-DRIVE R2 E88 512GB PCI-EXPRESS X8 SSD Datasheet preview
Z-DRIVE R2 E88 512GB PCI-EXPRESS X8 SSD
Brand: OCZ Pages: 2
Watchguard Firebox M470 Hardware Manual preview
Firebox M470
Brand: Watchguard Pages: 32
ONELAN OMNI-HD1 Installation & Configuration Manual preview
OMNI-HD1
Brand: ONELAN Pages: 24

Brands by name

Popular brands

Load more brands