manualshive.com logo in svg

Fujitsu Eternus DX410 S2, Cli User'S Manual

The Fujitsu Eternus DX410 S2 comes equipped with cutting-edge technology for data storage solutions. Easily navigate its advanced features with the comprehensive Cli User's Manual, available for free download from our website. Obtain optimal functionality and unleash the full potential of this remarkable product by referring to the user manual.

Share
Download
background image

Appendix A  Error Messages
    

ETERNUS CLI User’s Guide

Copyright 2015 FUJITSU LIMITED

P2X0-1030-09ENZ0

693

 

E0150

Collecting performance data.
Performance data is currently being collected. Wait for a while and retry the command.

E0151

Power-off or power-on in process.
Could not execute while the system is turning on or turning off. Try again after the system has completed 
powering-on.

E0152

Volumes formatting in process.
Could not execute while volumes are formatting. Check the progress status of the volumes using the 
"show volume-progress" command.
Try again after formatting is complete.

E0153

Encryption or decryption of volumes in process.
Could not execute while volumes are being encrypted or decrypted. Please check the progress of volumes 
operations by using the "show volume-progress" command.
Try again after volume encryption or decryption is complete.

E0154

Advanced Copy session active.
Could not execute while Advanced Copy sessions are processing. Check the status by using the "show 
advanced-copy-sessions" command and wait for the session to complete before retrying the command.
Try again after the Advanced Copy sessions starts up.

E0155

Volumes migration in process.
Could not execute while volumes are being migrated. Check the progress status of volumes by using the 
"show migration" command.

E0156

RAID group expansion in process.
Could not execute while a RAID group is being expanded. Check the progress status of RAID group 
operations by using the "show raid-group-progress" command.

E0157

Remote Copy session active.
Could not execute while Remote Copy sessions are processing. Check the status using GUI or ACM 
(ETERNUS SF AdvancedCopy Manager).

E0158

Controller firmware update in process.
Could not execute while controller firmware update is processing. Wait for a while and retry the command 
after the controller firmware update is complete.

E0159

Remote maintenance in process.
Could not execute while remote maintenance is processing. Wait for a while and retry the command after 
remote maintenance is complete.

E0160

Competing with background process.
Some operations are being performed by another process. Wait for a while and try again.

E0161

Competing with disk diagnosis running in background process.
Disk diagnosis is being performed by another process. Wait for a while and try again or stop the disk 
diagnosis.

E0162

Competing with RAID group diagnosis running in background process.
RAID group diagnosis is being performed by another process. Wait for a while and try again.

E0163

Competing with hot update of firmware in background process.
Hot update of firmware is being performed by another process. Wait for a while and try again.

E0164

Competing with cold update of firmware in background process.
Cold update of firmware is being performed by another process. Wait for a while and try again.

E0165

Competing with update of disk firmware in background process.
Disk firmware is being updated by another process. Wait for a while and try again.

Message

number

Message

Countermeasure for the error 

Summary of Contents for Eternus DX410 S2





















































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for Eternus DX410 S2

3onedata IES615-2D Series Quick Installation Manual preview
IES615-2D Series
Brand: 3onedata Pages: 3
3One data 7212 User Manual preview
7212
Brand: 3One data Pages: 5
3onedata IEM615 Series Hardware User Manual preview
IEM615 Series
Brand: 3onedata Pages: 33
B+B SmartWorx CR10 v2 Start Manual preview
CR10 v2
Brand: B+B SmartWorx Pages: 4
Hamlet HXDU2RFID User Manual preview
HXDU2RFID
Brand: Hamlet Pages: 10
Gigastone SmartBox Quick Start Manual preview
SmartBox
Brand: Gigastone Pages: 2
Hi-flying HF2221 User Manual preview
HF2221
Brand: Hi-flying Pages: 29
IBM SYSTEM STORAGE EXP3000 - INTEROPERABILITY MATRIX... Manual preview
SYSTEM STORAGE EXP3000 - INTEROPERABILITY MATRIX...
Brand: IBM Pages: 16
3Com 3C13640 Installation Manual preview
3C13640
Brand: 3Com Pages: 32
Mobatime DTS 4132.timeserver Mounting And Instruction Manual preview
DTS 4132.timeserver
Brand: Mobatime Pages: 108
IBM H SERIES RS/6000 Installation And Service Manual preview
H SERIES RS/6000
Brand: IBM Pages: 424
Tandberg Data REPLACE TAPE DRIVE IN STORAGELOADER VXA... Manual preview
REPLACE TAPE DRIVE IN STORAGELOADER VXA...
Brand: Tandberg Data Pages: 10
Tiger Serve1 Assembly Manual preview
Serve1
Brand: Tiger Pages: 16
LaCie 301336U Quick Install Manual preview
301336U
Brand: LaCie Pages: 24
Maxtor Maxtor OneTouch 4 User Manual preview
Maxtor OneTouch 4
Brand: Maxtor Pages: 84
Cayman Systems 2E-H-W User Manual preview
2E-H-W
Brand: Cayman Systems Pages: 170
Intermec Norand 6920 Reference Manual preview
Norand 6920
Brand: Intermec Pages: 232
Raidon InTANK IR2025 Quick Setup Manual preview
InTANK IR2025
Brand: Raidon Pages: 2

Brands by name

Popular brands

Load more brands