manualshive.com logo in svg

Fujitsu Eternus DX410 S2, Cli User'S Manual

The Fujitsu Eternus DX410 S2 comes equipped with cutting-edge technology for data storage solutions. Easily navigate its advanced features with the comprehensive Cli User's Manual, available for free download from our website. Obtain optimal functionality and unleash the full potential of this remarkable product by referring to the user manual.

Share
Download
background image

Appendix A  Error Messages
    

ETERNUS CLI User’s Guide

Copyright 2015 FUJITSU LIMITED

P2X0-1030-09ENZ0

695

 

E0186

Competing with setting date and time in background process.
Date and time are being set by another process. Wait for a while and try again.

E0187

Competing with expanding volume in background process.
A volume is being expanded by another process. Wait for a while and try again.

E0188

Competing with deleting Advanced Copy session in background process.
An Advanced Copy session is being deleted by another process. Wait for a while and try again.

E0190

Competing with registering dedicated hot spare in background process.
A dedicated hot spare is being registered by another process. Wait for a while and try again.

E0191

Competing with releasing dedicated hot spare in background process.
A dedicated hot spare is being released by another process. Wait for a while and try again.

E0192

Competing with collecting event information in background process.
Event information is being collected by another process. Wait for a while and try again.

E0193

Competing with deleting snap data volume in background process.
A Snap Data Volume is being deleted by another process. Wait for a while and try again.

E0194

Reclamation of Thin Provisioning Volume is in progress.
A Thin Reclamation process is being performed. Wait for a while and try again.

E0195

Rebuild or Copyback in process.
Rebuild or Copyback is being performed. Wait for a while and try again.

E0196

Competing with storage migration in background process.
Storage Migration is being performed by another process. Wait for a while and try again.

E0197

Quick Unmap in process.
Quick UNMAP (releasement of physical area) is being performed. Wait for a while and try again.

E0198

Flexible tier migration in process.
Flexible Tier Migration is being performed. Wait for a while and try again.

E0200

Competing with setting Flexible tier mode in background process.
The Flexible Tier mode is being set by another process. Wait for a while and try again.

E0201

Competing with deleting Flexible tier pool in background process.
A Flexible Tier Pool is being deleted by another process. Wait for a while and try again.

E0202

Competing with formatting Flexible tier pool in background process.
A Flexible Tier Pool is being formatted by another process. Wait for a while and try again.

E0203

Competing with registering Flexible tier volume in background process.
A Flexible Tier Volume is being registered by another process. Wait for a while and try again.

E0204

Competing with setting Flexible tier sub pool priority in background process
The Flexible Tier Sub Pool Priority is being set by another process. Wait for a while and try again.

E0205

Competing with setting Flexible tier pool parameters in background process.
The Flexible Tier Pool parameters are being set by another process. Wait for a while and try again.

E0206

Competing with Flexible tier migration in background process.
Flexible Tier Migration is being started or stopped by another process. Wait for a while and try again.

E0207

Competing with registering Thin Provisioning Pool in background process.
A Thin Provisioning Pool is being registered by another process. Wait for a while and try again.

Message

number

Message

Countermeasure for the error 

Summary of Contents for Eternus DX410 S2





















































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for Eternus DX410 S2

H3C MSR 20-20 Supplementary Manual preview
MSR 20-20
Brand: H3C Pages: 6
3Com OfficeConnect 3CP4144 How To Set Up preview
OfficeConnect 3CP4144
Brand: 3Com Pages: 4
3Com OfficeConnect 3CP4144 Release Note preview
OfficeConnect 3CP4144
Brand: 3Com Pages: 2
H3C MSR 20-20 User Manual preview
MSR 20-20
Brand: H3C Pages: 60
3Com NBX V3000 Analog Instruction Sheet preview
NBX V3000 Analog
Brand: 3Com Pages: 2
H3C MSR 20 Series Manual preview
MSR 20 Series
Brand: H3C Pages: 149
3Com 3C13636 Installation Manual preview
3C13636
Brand: 3Com Pages: 27
3Com OfficeConnect 3C19500 User Manual preview
OfficeConnect 3C19500
Brand: 3Com Pages: 52
Rorke Data A16F-R2431 Galaxy Raid Installation And Hardware Reference Manual preview
A16F-R2431 Galaxy Raid
Brand: Rorke Data Pages: 110
IBM DTTA-351010 - Deskstar 10.1 GB Hard Drive Specifications preview
DTTA-351010 - Deskstar 10.1 GB Hard Drive
Brand: IBM Pages: 188
NETGEAR RP614 v2 Installation Manual preview
RP614 v2
Brand: NETGEAR Pages: 2
Seagate Barracuda 7200.7 ST3120025A Product Manual preview
Barracuda 7200.7 ST3120025A
Brand: Seagate Pages: 58
Western Digital My User Manual preview
My
Brand: Western Digital Pages: 12
IBM 84885BU Maintenance And Troubleshooting Manual preview
84885BU
Brand: IBM Pages: 200
NEC Express5800/320Fa-L User Manual preview
Express5800/320Fa-L
Brand: NEC Pages: 406
DIGIWEB Box 7360 Quick Setup Manual preview
Box 7360
Brand: DIGIWEB Pages: 16
AXIOMTEK NA-1301 Hardware Installation Manual preview
NA-1301
Brand: AXIOMTEK Pages: 55
Weidmuller IE-SW-PL09M-5GC-4GT Hardware Installation Manual preview
IE-SW-PL09M-5GC-4GT
Brand: Weidmuller Pages: 15

Brands by name

Popular brands

Load more brands