Chapter 3 Configuration Settings and Display
3.1 Thin Provisioning Pool Management > format thin-pro-pool
ETERNUS CLI User’s Guide
Copyright 2015 FUJITSU LIMITED
P2X0-1030-09ENZ0
85
format thin-pro-pool
This command will format the Thin provisioning pool(s).
■
Syntax
■
Parameter
■
Example(s)
format thin-pro-pool {-pool-number
pool_number
| -pool-name
pool_name
} -mode {all|unformatted}
-pool-number
or
-pool-name
This parameter specifies the Thin provisioning pool identifiers. One or more Thin provisioning
pool identifiers can be specified. For details, refer to
"1.2.5 Thin Provisioning Pool Syntax"
.
-mode
This parameter specifies the range of the format.
all
All the areas are formatted (all of the data is deleted).
unformatted Unformatted areas are formatted. When there are no unformatted areas, the
command ends normally (no action from the command is performed).
When the "-mode all" parameter is specified to format all of the areas, all of the existing data is
deleted. Normally, the "-mode unformatted" parameter is used to format only unformatted
areas.
The following example formats all the area of Thin provisioning pool#01:
CLI> format thin-pro-pool -pool-number 01 -mode all
The following example formats the unformatted area of the Thin provisioning pool named "TPP05":
CLI> format thin-pro-pool -pool-name TPP05 -mode unformatted
Summary of Contents for Eternus DX410 S2
Page 2: ...This page is intentionally left blank ...
Page 756: ......
