Chapter 3 Configuration Settings and Display
3.4 Volume Management > create odx-buffer-volume
ETERNUS CLI User’s Guide
Copyright 2015 FUJITSU LIMITED
P2X0-1030-09ENZ0
189
create odx-buffer-volume
This command creates the ODX Buffer volume. The ODX mode setting must be enabled. Only one ODX Buffer
volume can be registered for an ETERNUS Disk storage system (multiple ODX Buffer volume cannot be
created).
■
Syntax
■
Parameter
create odx-buffer-volume -name name {-rg-number
rg_number
| -rg-name
rg_name
|
-pool-number
pool_number
| -pool-name
pool_name
| -ftrp-number
ftrp_number
| -ftrp-name
ftrp_name
}
-type {open|standard|tpv|ftv} -size
{
size
{tb|gb|mb}|max} [-priority {
ftsp_number
|auto}]
[-attention
attention
] [-encryption {enable|disable}]
-name
This parameter specifies the name for the ODX Buffer volume. Only one name can be
specified. For details about the contents that can be entered, refer to
.
-rg-number
or
-rg-name
This parameter specifies the identifier of the RAID group in which the ODX Buffer volume is
to be created. For details, refer to
"1.2.8 RAID Group Syntax" (page 22)
. This parameter can
be set when "open" or "standard" are set for the "-type" parameter.
-pool-number
or
-pool-name
This parameter specifies the identifier of the TPP in which the ODX Buffer volume is to be
created. For details, refer to
"1.2.5 Thin Provisioning Pool Syntax" (page 20)
. This parameter
can be specified when "tpv" is set for the "-type" parameter.
-ftrp-number
or
-ftrp-name
This parameter specifies the identifier of the FTRP in which the ODX Buffer volume is to be
created. For details, refer to
"1.2.6 Flexible Tier Pool Syntax" (page 21)
. This parameter can
be specified when "ftv" is set for the "-type" parameter.
-type
This parameter specifies the volume type of the ODX Buffer volume.
open
Standard volume (Standard). "open" type volumes that are created are
displayed as standard volumes.
standard
Normal open volumes (Standard)
tpv
Thin Provisioning Volume (TPV)
ftv
Flexible Tier Volume (FTV)
-size
This parameter specifies the size of the ODX Buffer volume. Select whether terabytes (TB),
gigabytes (GB), or megabytes (MB) are used for the capacity. From 1GB to 1TB can be
specified.
Example: 1tb (1TB), 120gb (120GB), 1024mb (1024MB)
max
Specify this option to create an ODX Buffer volume with the same capacity as
the largest free capacity in the specified RAID group. This option can be speci-
fied only when the volume type is Standard (Open).
Summary of Contents for Eternus DX410 S2
Page 2: ...This page is intentionally left blank ...
Page 756: ......
