Chapter 4 Function/System Settings and Display
4.3 Network Management > set community-profile
ETERNUS CLI User’s Guide
Copyright 2015 FUJITSU LIMITED
P2X0-1030-09ENZ0
493
set community-profile
This command modifies community profiles to add or to delete SNMP managers.
■
Syntax
■
Parameter
■
Example(s)
set community-profile -community
community_name
[-name
new-community-name
]
[-view {
view_name|
""}] [-manager-number {
manager_numbers
|none}]
-community This parameter specifies the SNMP community name, which can contain up to 32
alphanumeric characters. Only one community name can be specified at the same time.
If the SNMP community name includes a space ( ), it must be enclosed by double quotation
marks ("). Quotation marks are included in the character count.
Example: -community "community 001" (using 15 letters)
-name
Optional. This parameter specifies a new community name for a community that already
exists.
-view
Optional. This parameter specifies the SNMP MIB view name that is accessible by members of
the community. If the specified community is changed to be used for traps only, specify double
quotation marks ("") instead of a view name.
-manager-number
Optional. This parameter specifies the number of SNMP managers.
Any value between 1 and 10 can be specified. This number can be confirmed by using the
"show snmp-manager" command. One or more numbers can be specified using "," or "-". If
unlimited access is specified for the community, specify "none" instead of a manager number.
The following example sets the SNMP community. SNMP manager numbers 1 to 10 are specified, and the
SNMP MIB view name is "xview4":
CLI> set community-profile -community community1 -manager-number 1-10 -view xview4
The following example sets the SNMP community in which the SNMP community is named "community2",
the SNMP manager number is 2, and the SNMP MIB view is able to access all MIB views:
CLI> set community-profile -community community2 -manager-number 2 -view xview4
Summary of Contents for Eternus DX410 S2
Page 2: ...This page is intentionally left blank ...
Page 756: ......
