Chapter 9 Connectivity Management
9.2 Functions in the Action Area for Connectivity
ETERNUS Web GUI User’s Guide
296
Copyright 2011 FUJITSU LIMITED
P2X0-1090-02ENZ0
The procedure to create a FC host group is as follows:
Procedure
1
Click [Add FC Host] in [Action].
2
Enter a host group name to be created, and select a host response to be
assigned to the host group.
•
FC Host Group Name
Specify the host group name.
An existing host group name cannot be specified. Refer to
for details.
The following input conditions apply:
-
1 - 16 alphanumeric characters and symbols (except ", (comma)" and "?")
-
Space
•
Host Response
Select a host response to be assigned to a host group.
The host response list created in the ETERNUS DX Disk storage system is displayed.
-
Windows EMPD (*1)
-
Linux EMPD (*1)
-
Solaris EMPD (*1)
-
Solaris MPxIO
-
HP-UX
-
AIX EMPD (*1)
-
AIX VxVM
-
AIX Single Path
-
VS850/SVC
-
Host responses created in the ETERNUS DX Disk storage system
-
Others
*1:
EMPD: ETERNUS Multipath Driver
•
To change the settings of the host groups, refer to
.
•
To add a port to an existing host group, refer to
.
•
To change the host group names, refer to
•
A FC host and an FCoE host can be members of the same host group.
Both "FC host" and "FCoE host" are abbreviated as "FC host" in this
guide.
