Chapter 9 Connectivity Management
9.2 Functions in the Action Area for Connectivity
ETERNUS Web GUI User’s Guide
345
Copyright 2011 FUJITSU LIMITED
P2X0-1090-02ENZ0
The procedure to create a SAS port group is as follows:
Procedure
1
Click [Create SAS Port Group] in [Action].
2
Specify the name of the port group to be created, select all the ports to be
registered in the port group, and click the [Create] button.
•
Name
Specify the port group name.
An existing port group name cannot be specified.
The following input conditions apply:
-
1 - 16 alphanumeric characters and symbols (except ", (comma)" and "?")
-
Space
•
Checkbox to select a port
Select the checkbox of the SAS port to be registered in a SAS port group.
-
Ports without the host affinity setting can be members of a port
group, regardless of whether the affinity mode for the group is
enabled (On) or disabled (Off).
•
To change the settings of a port groups, refer to
.
•
To add a port to an existing port group, refer to
.
•
When a port that has the affinity mode enabled (On) is
selected, ports that have the affinity mode disabled (Off)
cannot be selected.
•
When a port that has the affinity mode disabled (Off) is
selected, ports that have the affinity mode enabled (On)
cannot be selected.
•
Up to eight ports can be selected.
