Chapter 11 System Management
11.2 Functions in the Action Area for System
ETERNUS Web GUI User’s Guide
585
Copyright 2011 FUJITSU LIMITED
P2X0-1090-02ENZ0
3
Click the [OK] button.
→
Setting of the subsystem parameter starts.
4
Click the [Done] button. Return to the [System Settings] screen.
End of procedure
11.2.9.5
Setup Encryption Mode
This function sets the encryption mode.
The procedure to set the encryption mode is as follows:
Procedure
1
Click [Setup Encryption Mode] in [Action].
•
Encryption related functions are only available after enabling the
encryption mode.
•
When disabling the encryption mode, reboot the ETERNUS DX Disk
storage system.
•
When changing the encryption mode, delete all the encrypted volumes
and volumes being encrypted in advance.
•
Once a volume has been encrypted, it cannot be changed back to a
non-encrypted volume.
•
This function cannot be changed in the following conditions:
-
Encrypted volumes exist
-
Volumes being encrypted exist
When using the encryption function, set the encryption mode to "Fujitsu
Original Encryption" or "AES".
