10. Troubleshooting
Check the following points if you encounter problems with the Console
Drawer.
10.1 No image displayed on monitor
Symptom Predicted
cause
Solution
The AC cable is not connected to
the electric outlet, or to the switch
device, or not inserted into the
socket properly.
Connect the AC cable properly.
The AC power is off.
Turn on the AC power.
POWER button was turned off.
Power lamp (green) is out.
Turn POWER button ON.
LED light for “Power
Indicator” is turned off.
No image signal from server.
(Suspended state)
Input image signal from server.
The server is in the stand-by mode. Press any key in keyboard or operate
the touchpad, which makes the
server unlock the stand-by mode.
Power Indicator glows
orange.
Or display shows
Message of “POWER
SAVING” when pressing
the “MENU/ENTER”
button.
The monitor cable is not connected,
or not inserted into the socket
properly.
Connect the monitor cable properly.
The setting value for resolution
and refresh rate in server is out of
this product capability.
Set the proper resolution and refresh
rate in the server, which can be
supported by this product.
The AC power for this product was
turned on after the power for the
server was turned on
Turn on the AC power for this
product, before or at the same time
when the power for server is turned
on.
Although the Power
Indicator glows, the
Monitor does not display
at all, or the Monitor only
displays one of the
following messages.
“OUT OF RANGE
H: ***kHz V: ***kHz,
SEE USER’S MANUAL,”
or
“NO SYNC SIGNAL,
SEE USER’S MANUAL”
The monitor cable is not connected,
or not inserted into the socket
properly.
Connect the monitor cable properly
10.2 Monitor display is strange
Symptom Predicted
cause Solution
Grid screen that flickers Unfocused
Adjust the focus.
Vertical stripes are
visible
Monitor adjustment is not
proper.
Adjust clock and then focus.
Position is not proper.
Adjust clock and then position.
Display is larger or
smaller than the monitor
screen
Use of a non-standard display
resolution (mode)
Change the server settings to use
the standard display resolution
(mode).
30
Summary of Contents for FD-1100MT
