Chapter 4 Various Ways to Scan
34
3
Place a document on the document bed.
Place the document face-down to align its top left-hand corner with
the reference point.
4
In the scanner driver, configure the scan settings for using
the flatbed.
For details, refer to the scanner driver's Help.
5
Scan the document with an image scanning application.
For details, refer to the image scanning application manual.
6
Attach the document cover.
7
Close the document cover.
For details, refer to
"1.4 Opening/Closing the Document Cover" (page
.
Do not look directly into the light source.
ATTENTION
Do not move the document during a scan.
Reference Point