Chapter 6 Troubleshooting
55
A shadow appears at the top or the bottom of the
scanned image.
Have you adjusted the offset (position to start the scan)?
No
In [Device Setting] of the Software Operation Panel, adjust the offset in the sub-
scanning direction.
For details, refer to
" Adjusting the Position to Start a Scan [Offset/Vertical
Magnification Adjustment]" (page 75)
.
Yes
Did you use the Page Edge Filler function to fill out the
shadow around the edge?
No
In the scanner driver or in [Device Setting 2] of the Software Operation Panel, use
the Page Edge Filler function to fill out the shadow around the edge.
For details, refer to
" Removing Shadows/Streaks That Appear around the
Scanned Image [Page Edge Filler (FB)]" (page 76)
.
Yes
If the problem persists, check the items in
"6.3 Before You Contact the Scanner
first, then contact your FUJITSU scanner dealer or an
authorized FUJITSU scanner service provider.