Chapter 7 Operational Settings
71
Item
Description
Parameter/Value
Factory
Default
Count
Displays the approximate total number of sheets scanned on the
flatbed.
Total Count (FB)
0
Power saving
Specify the waiting time before the scanner enters power saving
mode.
Range: 5 to 235 min. (in increments of 5)
15 min.
Power off after a certain period of time: Select to set the scanner
to turn the power off automatically if the scanner is left on for a
certain period of time without being used.
You can set a specific period of time for the scanner to turn off
automatically.
[Power off after a certain period of time] check
box
Selected
1 Hour/2 Hours/4 Hours/8 Hours
(when the [Power off after a certain period of
time] check box is selected)
4 Hours
Offset Setting
Adjust the position to start a scan on the selected scanning side.
Unit: Flat bed
Main/Sub: -2 to +2 mm
(in increments of 0.5)
Main/Sub: 0
mm
Vertical
magnification
Adjustment
Adjust the magnification level in feed direction for the selected
scanning method.
Unit: Flat bed
Range: -3.1 to 3.1% (in increments of 0.1)
0%