Chapter 4 Various Ways to Scan
32
Scanning a Book
1
Open the document cover.
For details, refer to
"1.4 Opening/Closing the Document Cover" (page
2
Remove the document cover by pulling it out in the
direction of the arrow.
3
Place a document on the document bed.
Place the document face-down to align its top left-hand corner with
the reference point.
4
In the scanner driver, configure the scan settings for using
the flatbed.
For details, refer to the scanner driver's Help.
4.2 Scanning Documents of Different Types and Sizes
ATTENTION
A curled or folded document may create a small gap between the
document and the document bed, causing the scanned image to
be blurred.
Reference Point
