background image

fi-4220C2 Image Scanner Getting Started

 

iii

other office equipment. The program backs the 
development and dissemination of products with 
functions that effectively reduce energy 
consumption. It is an open system in which 
business proprietors can participate voluntarily. 
The targeted products are office equipment such 
as computers, monitors, printers, facsimiles, 
copiers, scanners, and multifunction devices. 
Their standards and logos (

) are uniform 

among participating nations.

Use in High-safety Applications

This product has been designed and manufactured 
on the assumption that it will be used in office, 
personal, domestic, regular industrial, and 
general-purpose applications. It has not been 
designed and manufactured for use in applications 
(simply called "high-safety applications" from 
here on) that directly involve danger to life and 
health when a high degree of safety is required, 
for example, in the control of nuclear reactions at 
nuclear power facilities, automatic flight control 
of aircraft, air traffic control, operation control in 
mass-transport systems, medical equipment for 
sustaining life, and missile firing control in 
weapons systems, and when provisionally the 
safety in question is not ensured. The user should 
use this product with adopting measures for 
ensuring safety in such high-safety applications. 
PFU LIMITED assumes no liability whatsoever 
for damages arising from use of this product by 
the user in high-safety applications, and for any 
claims or compensation for damages by the user 
or a third party.

About the Use of Mercury

To avoid unexpected injury, read the following 
carefully. 
Doing the following actions may result in serious 
personal injuries: 

Do not put the substance contained in the lamp 
in your mouth as it has mercury.

Do not breathe the chemical liquid contained in 
the scanner lamps.

Do not incinerate, crush, or shred the lamps or 
scanner parts.

Trademarks

Microsoft, Windows, and Windows NT are 
registered trademarks of Microsoft Corporation in 
the United States and/or other countries. 
ISIS, QuickScan and their respective logos are 
trademarks or registered trademarks of Pixel 
Translations, a division of Captiva Software 
Corporation in the United States.
Adobe, the Adobe logo, and Acrobat are either 
registered trademarks of Adobe Systems 
Incorporated in the United States and/or other 
countries.
Other product names are the trademarks or 
registered trademarks of the respective companies.

How Trademarks Are Indicated In 
This Manual

References to operating systems (OS) and 
applications are indicated as follows:   

Where there is no distinction between the different 
versions of the above operating system, the 
general term "Windows " is used.

Ff

Lamp(s) inside this product contain 
mercury and must be recycled or 
disposed of according to local, state, 
or federal laws. 

H

g

Adobe
Acrobat 6.0

Adobe® Acrobat® 6.0 Standard

Windows 95

Microsoft

®

 Windows

®

 95 oper-

ating system

Windows 98

Microsoft

®

 Windows

®

 98 oper-

ating system.

Windows Me

Microsoft

®

 Windows

®

 Millen-

nium Edition operating system.

Windows NT 
4.0

Microsoft

®

 Windows

® 

NT 4.0 

Server operating system,
Microsoft

®

 Windows

® 

NT 4.0 

Workstation operating system.

Windows 2000

Microsoft

®

 Windows

®

 2000 Pro-

fessional operating system.

Windows XP

Microsoft

®

 Windows

®

 XP Pro-

fessional operating system,
Microsoft

®

 Windows

®

 XP Home 

Edition operating system.

Summary of Contents for fi-4220C2































Reviews: