22. Setting the Numbering Print Function (for fi-475PR Imprinter Option)
You can specify conditions of the numbering print function from the operator panel when the scanner is
equipped with the fi-475PR imprinter. The numbering counter increments 1 time each sheet of paper
that is read. Numbering print starts with a top margin of 42 mm.
<Screen 62>
1 Press “Next”
or “Previous”
to
display Screen 62.
2 At Screen 62, press
or
to select
“On”. Press
if you want to activate
the setting function. The scanner displays
Screen 62-1, indicating that the setting
function is activated.
NOTICE
When the setting function is disabled, the screen is as shown right.
<Screen 62-1>
3 At Screen 62-1, select the number of
digits. Press
or
to select “5” or “8”
then press
. The scanner displays
Screen 62-2.
<Screen 62-2>
4 At Screen 62-2, select the initial number.
Press
or
to move the place of the
blinking (changeable) digit and press
or
to change the value, press
.
The scanner displays Screen 62-3.
NOTICE
The possible maximum number is 99999 (for five digits) or 16777215 (for eight digits).
Summary of Contents for Fi-4750c - Color Duplex Document Scanner 50ppm 90ipm Ccd/scsi
