Fujitsu fi-590PRB, Operator'S Manual

10 | 

2.6 Replacing the Print Cartridge 

CAUTION

Make sure that you turn off the scanner 
power and unplug the power cable from the 
outlet. 

If the cartridge replacement is done with 
power turned on, it may cause electric shock 
or imprinter failure. 

Replace the Print Cartridge as follows: 

ATTENTION

●

When the following message appears, replace 
the Print Cartridge as soon as possible.  

If you continue to print without replacing the 
cartridge, your print output will continue to 
appear lighter and lighter. 

●

When installing or replacing the print cartridge, 
be careful not to insert it out of place. 

1.  Confirm that the scanner is turned off. 

2.  Press the tabs on the left and right sides of the top 

cover and lift to open the top cover. 

3.  Turn the blue lever toward left and open the 

cartridge holder. 

4.  Take out the Print cartridge from the holder. 

5.  Take the new Print Cartridge out of its pouch and 

detach the protection tape from the Print 
Cartridge.  

ATTENTION

Do not touch the metal part of the cartridge nor 
put the tape back again.  

6.  Insert the Print Cartridge. 

HINT

●

Insert the cartridge with its Tab positioned 
toward left side and install it. 

●

Be careful not to let the print cartridge 
touch or catch on to the print circuit film. 

7.  Turn the lever on the print cartridge toward right 

to fix it. 

Tab 

Top cover 

Tab