Chapter 9 Operational Settings
194
Scanning Thick Plastic Cards
[Feed Mode] (fi-7180/fi-7280)
When you use fi-7180/fi-7280 to scan at 300 dpi or less (80
ppm) in landscape, plastic cards with a thickness up to 1.4
mm can be scanned.
1
Start up the Software Operation Panel.
For details, refer to
"9.1 Starting Up the Software Operation Panel"
.
2
From the listing on the left, select [Device Setting 2]
[Feed Mode].
3
Specify the feed mode.
To scan a plastic card up to 1.4 mm thick, select [Thick cards (1.25
mm or more)].
Scanning at High Altitude [High Altitude Mode]
Select whether to enable or disable high altitude mode.
Enabling this setting allows you to use the scanner at 2,000 m
or higher altitudes.
1
Start up the Software Operation Panel.
For details, refer to
"9.1 Starting Up the Software Operation Panel"
2
From the listing on the left, select [Device Setting 2]
[High Altitude Mode].
3
Select whether to enable or disable [High Altitude Mode].
When you select [Enable], you can use the scanner at 2,000 m or
higher altitudes.
ATTENTION
Scanning speed slows down when you select [Thick cards (1.25
mm or more)].
