Chapter 9 Operational Settings
204
Detecting Vertical Streaks [Vertical Streak
Detection]
Select whether to enable or disable vertical streak detection.
After enabling this setting,
flashes on the LCD when
a vertical streak may occur in the images that are scanned
through the ADF.
[Clean glass!] also flashes on the second line in the [Ready]
screen.
Check the information, and then clean the glass.
For details about checking the information, refer to
For details about cleaning, refer to
1
Start up the Software Operation Panel.
For details, refer to
"9.1 Starting Up the Software Operation Panel"
2
From the listing on the left, select [Device Setting 2]
[Vertical Streak Detection].
3
Select whether to enable or disable [Vertical Streak
Detection].
When you select [Enable], the scanner detects vertical streaks (dirt
on the glass) during scanning with the ADF.
9.9 Settings Related to Scanner Maintenance
HINT
This setting can also be configured in the operator panel.
