Chapter 2 How to Load Documents
43
How to Load Documents
1
Pull out the chute extensions according to the length of
the document.
For details, refer to
"1.6 Setting Up the ADF Paper Chute (Feeder)"
2
Bring down the stacker, slide out the stacker extension 1
and stacker extension 2 towards you, and lift up the
stopper according to the length of the document.
For details, refer to
"1.7 Setting Up the Stacker" (page 30)
.
3
Load a document face-down in the ADF paper chute
(feeder).
4
Adjust the side guides to the width of the document.
Do not leave space between the side guides and the document.
Otherwise, the document may be fed skewed.
5
Scan the document with the image scanning application.
For details, refer to the image scanning application manual.
ATTENTION
Remove all paper clips and staples. Reduce the number of sheets
if a multifeed or pick error occurs.
Side guides
