60 - Memory Upgrade Module
4
Align the memory upgrade module with the component side up. Align the connector edge of the memory
upgrade module with the connector slot in the compartment. Be sure the alignment keys line up with those in
the slot.(Figure 29)
5
Insert the memory upgrade module at a 45° angle. Press the connector edge of the module firmly down and
into the connector until it lodges under the retaining clip. You’ll hear a click when it is properly in place.
6
Replace the cover and reinstall the screws.
Figure 27. Removing the Memory COver Screw
Figure 28. Opening the Memory Compartment
T
HE
MEMORY
UPGRADE
MODULE
IS
NOT
SOMETHING
YOU
ROUTINELY
REMOVE
FROM
YOUR
NOTEBOOK
.
O
NCE
IT
IS
INSTALLED
,
YOU
SHOULD
LEAVE
IT
IN
PLACE
UNLESS
YOU
WANT
TO
CHANGE
SYSTEM
MEMORY
CAPACITY
.
Memory Cover Screw
Memory Cover
