226
CHAPTER 11 MULTIFUNCTIONAL TIMER
11.4.4
A/D Trigger Control Register (ADTRGC)
This register controls the A/D trigger signal output when a free-run timer compare
match or a zero detection occurs.
■
A/D Trigger Control Register (ADTRGC)
AD1E
A/D1 trigger output enable bit
0
Disable
1
Enable
AD2E
A/D2 trigger output enable bit
0
Disable
1
Enable
SEL1
A/D1 trigger source select bit
0
At zero detection
1
At compare match
SEL2
A/D2 trigger source select bit
0
At zero detection
1
At compare match
-
-
-
-
-
-
-
-
SEL2
SEL1
AD2E
AD1E
ADTRGC
Address: 0000AB
H
AD trigger control register
R/W: Readable/Writable
- : Unused bit
Bit7
Bit6
Bit5
Bit4
Bit3
Bit2
Bit1
Bit0
R/W
R/W
R/W
R/W
Initial value: XXXX0000
B
: Initial value
Table 11.4-3 A/D Trigger Control Register (ADTRGC)
Bit Name
Function
bit7
bit6
bit5
bit4
Unused bit
•
The read value is indeterminate.
•
Writing to these bits have no effect on operation.
bit3
SEL2:
A/D2 trigger source select bit
This bit is the select bit if A/D2 trigger is outputted when a zero detection of the free-
run timer or a compare match occurs.
bit2
SEL1:
A/D1 trigger source select bit
This bit is the select bit if A/D1 trigger is outputted when a zero detection of the free-
run timer or a compare match occurs.
bit1
AD2E:
A/D2 trigger enable bit
•
When this bit is set to "0", the A/D2 trigger signal is not outputted.
•
When this bit is set to "1", the A/D2 trigger signal can be outputted.
bit0
AD1E:
A/D1 trigger enable bit
•
When this bit is set to "0", the A/D1 trigger signal is not outputted.
•
When this bit is set to "1", the A/D1 trigger signal can be outputted.
Summary of Contents for FR60Lite
