3
FTP-623MCL400/FTP-623DCL002
For print head
4.2 to 8.5 VDC (4 or 5 Ni-Cd or Ni-MH batteries, equivalent to 2 Li-ion)
Approximately 3.0 A (peak value, 7.2 V, 100% printing ratio)
For motor
4.2 to 8.5 VDC (4 or 5 Ni-Cd or Ni-MH batteries, equivalent to 2 Li-ion)
Average 0.7 A or less
For logic
5 VDC
±
5%, 0.15 A
Weight
Mechanism: approximately 75 g. Interface board: approximately 60 g
Printer mechanism
Dimensions
73 (W)
×
49 (D)
×
20 (H) mm (excluding knob, lever, and flexible PC board)
Interface board
Dimensions
108 (W)
×
91 (D)
×
18 (H) mm
Pulse durability : 1
×
10
8
pulse/dot (using Fujitsu Takamisawa's standard
driving method)
Wear resistance: 50 km (at 25% printing ratio)
Operating temperature
+5 to +40
°
C*
3
Operating humidity
20 to 85% RH (no condensation)
Storage temperature
–20 to +60
°
C (excluding paper)
Storage humidity
5 to 95% RH (no condensation)
Head temperature
By thermistor
Detection
Paper out/Mark detect
By photointerrupter (command set)
Voltage
By micro controller
Head-up
By microswitch
Paper width
58 mm
1 ply (roll) : FTP-020PG021
Long life (roll) : FTP-020PR202
Label (roll) : FTP-040PL021
2 ply (TCC)
: FTP-020P8820
2 ply (roll) : FTP-020P7121
Specifications
Item
(Continued)
Operating
voltage
Thermal head life
Environmental
conditions
+0
–1
Recommended thermal sensitive paper
*1: Character composition for single density reduced mode is the same as for single density standard mode.
*2: The data to be printed is automatically read out by the printer driver equipment memory (host system frame
memory). The communication is parameter transfer.
*3: Temperature range for guaranteed printing density. It can be operated in the range of 0 to +40
°
C.
