3
FTP-624MCL001/002/FTP-624DCL/DSL
For head
Voltage: 4.2 to 8.5 VDC (equivalent to 2 Lithium lon batteries)
Peak current: approx. 2.6 A (conditions: room temp., 7.2 VDC, 64 dots on)
For motor
Voltage: 4.2 to 8.5 VDC (equivalent to 2 Lithium lon batteries)
Peak current: approx. 0.8 A (conditions: room temperature, 7.2 VDC)
For logic
Voltage: 5 VDC
±
5%
Current: 0.2 A maximum
Mechanism
82 (W)
×
46 (D)
×
20 (H) mm (excluding lever and knob diameter)
Dimensions
Interface board
131 (W)
×
89 (D)
×
24 (H) mm
Weight (Mechanism)
Approximately 80 g
Expected life
Mechanism
Pulse durability: 1
×
10
8
pulse/dot (using Fujitsu Takamisawa's standard
driving method)
Wear resistance: 50 km (at 12.5% print ratio)
Operating temperature
0 to +50
°
C*
2
Operating humidity
20 to 85% RH (no condensation)
Storage temperature
–20 to +60
°
C (excluding paper)
Storage humidity
5 to 95% RH (no condensation)
Head temperature
By thermistor (applied energy control, abnormal temperature detection)
Detection
Paper out/Mark detect
By photointerrupter
Head-up
By microswitch
For front insertion use (58 mm width) : FTP-020PU001, FTP-020PG021
For rear insertion use (60 mm width) : FTP-020P0020, FTP-020PG106
Recommended thermal sensitive paper
In Europe (58 mm width) : FTP-021P0060-45
· Oji Paper : PD150R, PD160R, PD170R
· NIPPON Paper : TF50KS-E4,TF60KS-E,TF50KS-E
· MITSUBISHI Paper Mills : P220VBB-1, AFP-235
Specifications
Item
(Continued)
Power
supply
Environmental
conditions
*1: There may be exceptions.
*2: Gua5
°
C to +40
°
C.
