2
FTR-K1 SERIES
* 1 Need to consider the heat to PCB when max. current is more than 10A
* 2 Minimum switching loads mentioned above are reference values. Please perform the con
fi
rmation test with actual
load before production since reference values may vary according to switching frequencies, environmental conditions
and expected reliability levels.
FTR-G1 SERIES
SPECIFICATION
Item
FTR-G1
Contact
Data
Con
fi
guration
1 form C
Material
Silver-tin oxide indium (AgSnO
2
)
Contact voltage drop
Max. 100mV at 1A, 6VDC (after stabilization)
Contact rating
25A at 14VDC (locked motor load)
Max. carrying current *
1
25A/1 hour (25 °C, 100% rated coil voltage)
Max. switching voltage
16VDC (reference)
Max. switching current
35A (reference)
Min. switching load *
2
1A, 6VDC
Life
Mechanical
Min. 1 x 10
6
operations
Electrical
* Min. 100 x 10
3
operations,
14VDC, 25A inrush power window motor
(1 operation: 1 forward and 1 reverse)
* Min. 100 x 10
3
operations
14VDC, 20A inrush door locked motor
Coil Data
Rated power
640mW
Operate power
237mW
Operating temperature range
-40 °C to +85 °C (no frost)
Timing Data
Operate (at nominal voltage)
Max. 10 ms (without bounce)
Release (at nominal voltage)
Max. 5 ms (without bounce, no diode)
Insulation
Resistance (initial)
Min. 100M
Ω
at 500VDC
Dielectric withstanding
voltage
Open contacts
500VAC , 1 min.
Between coil
and contacts
500VAC, 1 min.
Other
Vibration resistance
Misoperation
10 to 55Hz double amplitude 1.5mm
Shock
Misoperation
100m/s² minimum (10G)
Endurance
1,000m/s² minimum (100G)
Weight
Approximately 3.5 g
Sealing
Plastic sealed cat III
