79
- Device Ports
Headphone/Line-Out Jack
The headphone/line-out jack allows you to connect headphones or powered external speakers to your
notebook.
(See Figure 3 for location.)
Your headphones or speakers must be equipped with a 1/8” (3.5
mm) stereo mini-plug. In order to connect headphones or speakers follow these easy steps:
1
Align the connector with the port opening.
2
Push the connector into the port until it is seated.
Microphone/Line-In Jack
The microphone/line-in jack allows you to connect an external mono microphone.
(See Figure 3 for
location.)
Your microphone must be equipped with a 1/8”(3.5 mm) mono mini-plug in order to fit into the
microphone jack of your notebook. In order to connect a microphone follow these easy steps:
1
Align the connector with the port opening.
2
Push the connector into the port until it is seated.
External Video Port
The external video port allows you to connect an external monitor or LCD projector.
(See Figure 5 for
location.)
In order to connect an external video device, follow these easy steps:
1
Align the connector with the port opening.
2
Push the connector into the port until it is seated.
3
Tighten the two hold-down screws, located on each end of the connector.
I
F
YOU
PLUG
HEADPHONES
INTO
THE
HEADPHONE
JACK
,
BUILT
-
IN
STEREO
SPEAKERS
WILL
BE
DISABLED
.
P
RESSING
THE
[F
N
] + [F10]
KEYS
ALLOWS
YOU
TO
CHANGE
YOUR
SELECTION
OF
WHERE
TO
SEND
YOUR
DISPLAY
VIDEO
. E
ACH
TIME
YOU
PRESS
THE
KEY
COMBINATION
,
YOU
WILL
STEP
TO
THE
NEXT
CHOICE
,
STARTING
WITH
THE
BUILT
-
IN
DISPLAY
PANEL
ONLY
,
MOVING
TO
THE
EXTERNAL
MONITOR
ONLY
,
FINALLY
MOVING
TO
BOTH
THE
BUILT
-
IN
DISPLAY
PANEL
AND
AN
EXTERNAL
MONITOR
.
