Fujitsu LifeBook B2620 User Manual Download

Page: 107 / 120

101

W I r e l e s s L A N U s e r ’ s G u i d e

4. Check [Full computer name] and [Workgroup]. Ask

your network administrator and check the setting.

Table 21: Setting computer name and workgroup

To change the setting, click [Change], and follow the
instructions on the screen. [System Properties] appears
again.

5. Click [OK]. When a message appears prompting you

to restart the computer, click [Yes].

Sharing

In this section, you set sharing of the drive, folder, and
printer.

You need to set this only when you are sharing files or a
printer with other computers on the network.

When you share a drive, folder, or printer, you can use
these from any computer on the network.

Setting [File and Printer Sharing for Microsoft
Networks]

1. Click [Start] -> [Control Panel]. Make sure the

Classic View is selected.

2. Double-click the [Network Connection] icon.

3. Right click the [Wireless Network Connection], and

then click [Properties] from the menu that appears.
[Wireless Network Connection Properties] appears.

4. If [File and Printer Sharing for Microsoft Networks]

is displayed in the list:

Make sure that it is checked. If it is not checked,
check it, and click [OK]. You do not have to perform
the following steps. Go to the next section, “Sharing
Files.”

If [File and Printer Sharing for Microsoft Networks]
is

not

found in the list, click [Install], and perform

Step 5 and the subsequent steps. When you click
[Install], [Select Network Component Type]
appears.

5. Perform the following steps.

■

Click [Service].

■

Click [Add]. [Select Network Service] appears.

6. Perform the following steps.

■

Click [File and Printer Sharing for Microsoft
Networks].

■

Click [OK]. You will go back to [Wireless Network
Connection 2 Properties], and [File and Printer
Sharing for Microsoft Networks] is added to the list.

7. Click [Close].

Sharing Files

The following example shows how to set sharing the
“Work” folder on the c: drive.

1. Click [Start] -> [My Computer].

2. Double-click the [Local Disk (c:)] icon.

3. Right click the “Work” folder, and then click

[Sharing and Security] from the menu that appears.
[Work Properties] appears.

4. Click [If you understand the security risks but want

to share files without running the wizard, click

here].

In the [Work Properties] window, the description under
[Network Sharing and security] changes.

5. Check [Share this folder on the network].

Uncheck [Allow network users to change my files], if
the shared folder is for read only.

6. Click [OK]. The folder is set shared, and the “Work”

folder icon changes.

Printer Sharing

1. Press [Start]->[Control Panel] (or [Settings], if

viewing in Classic mode)-> [Printers and Faxes].
The Printers and Faxes display will appear and the
connected printers will be displayed.

2. Right-click the printer to be shared, and click

[Sharing] from the menu that appears. The proper-
ties of the printer to be shared will be displayed. Set
printer sharing.

On the display, the printer sharing setting is recom-
mended by the Network Setup Wizard, but for the wire-
less LAN network, security is maintained by network

Item

Description

Computer
Name

A name to identify the computer on
the network. You can specify any
name to each computer. Use up to 15
single-byte characters. For easier
identification, use the model name or
user name.

Workgroup

A name of the network group. Use up
to 15 single-byte characters.

AdHoc Network:

Specify the same

name to all computers within the
same network.

Infrastructure Network:

Specify workgroup name to connect
to.

P O I N T

If you have already clicked [If you understand the
security risks but want to share files without running the
wizard, click here], this window does not appear.

B Series.book Page 101 Thursday, September 26, 2002 11:01 AM