Fujitsu LifeBook B2630 User Manual Download

Page: 102 / 114

L i f e B o o k B S e r i e s – A p p e n d i x

Table 15: Setting parameters

8. When you finish your entry, click [OK]. [Wireless

Network Connection 2 Properties] appears again.

9. Make sure the network name you specified for the

SSID in Step 7 is added under [Preferred networks].

Network Connection

The section describes how to set the network connection
for a computer running Windows XP.

Network Settings

In this section, you set “TCP/IP Settings,” and complete
“Checking Computer Name and Workgroup” required
for the network connection.

TCP/IP Settings

1. On [Wireless Network Connection Properties], click

[General].

2. Perform the following steps.

■

Click [Internet Protocol (TCP/IP)].

■

Click [Properties]. [Internet Protocol (TCP/IP)
Properties] appears.

3. Set an IP address. Ask your network administrator

and check the setting.

Table 16: Setting an IP address

5. Click [OK].

6. Close [Network Connection].

Checking the Full Computer Name and Workgroup

1. Click [Start] -> [Control Panel]. Make sure the

Classic View is selected.

2. Double-click the [System] icon. [System Properties]

appears.

3. Click the [Computer Name] tab.

4. Check [Full computer name] and [Workgroup]. Ask

your network administrator and check the setting.

Item

Description

Network
Name
SSID

Enter the network name to which you
want to connect. This is a required item.
For the network name, ask your LAN
administrator.

AdHoc network:

Set the same name for all

of the computers that are to be connected.

Infrastructure network:

Specify the same

name as that specified on the access point
that is to be connected. For access point
instructions, refer to the manual that
comes with the access point.

Key
Format

Click the down arrow and select the input
for the Network key.

ASCII
characters

Select this when using
ASCII characters for the
Network Key. Characters
that can be used follow:

0-9, A-Z, a-z, and
_ (underscore)

Example:

To set the key to

“ABC12”, input “ABC12”.

Hexa-
decimal
characters

Select this when using
hexadecimal characters for
the Network Key.

Use this if there is a wireless
LAN card in the network
that has the Network Key
set to a character code. In
’Network Key’, input the
same value as the other
wireless LAN card.

P O I N T

If [Wireless Network Connection 2 Properties] is not
displayed, click [Start] -> [Settings] -> [Control Panel],
and double-click the [Network Connection] icon.

Right click the [Wireless Network Connection], and
then click [Properties] from the menu that appears.

Item

Description

AdHoc
Network

Set the IP address and subnet mask.
Click [Use the following IP address].
Enter a value for [IP address] and
[Subnet mask]. See “Setting IP
Addresses” on page 102 to set IP
address and subnet mask.

For
Infrastructure
Network

Select [Obtain an IP address
automatically]. For the DNS server,
select [Obtain DNS server address
automatically]. For the IP address,
DNS server, and default gateway,
follow the network administrator's
instructions, if any.

P O I N T

If you have changed the setting, [Close] is shown
instead. Click [Close].

B Series.book Page 96 Tuesday, March 25, 2003 5:29 PM