5
Primary Master Submenu of the Main Menu
The Primary Master submenu identifies what ATA/
ATAPI devices are installed.
Note:
Actual hard drive label shown may vary. Depending
on the drive type, information such as cylinders, heads and
sectors may or may not be displayed.
Figure 2. Primary Master Submenu
Table 2: Fields, Options and Defaults for the Primary Master Submenu of the Main Menu
Menu Field
Options
Default
Description
Type:
•
Auto
•
None
[Auto]
Selects the ATA/ATAPI device type. Select Auto to have the type automati-
cally identified by the BIOS at POST. If None is selected, none of the follow-
ing Set-up items appear.
LBA Format
Logical Block Addressing (LBA)
Total Sectors:
___
___
The total number of sectors on your hard disk
Maximum Capacity:
___
___
The maximum capacity of your hard disk
Multi-Sector Transfers:
___
[16 Sectors]
This option cannot be changed when Auto is selected; it is automatically
selected.
LBA Mode Control:
___
[Enabled]
Enables or disables logical Block Addressing in place of Cylinder, Head, Sector
addressing. This option cannot be changed when Auto is selected; it is auto-
matically selected.
PhoenixBIOS Setup Utility
F1
Help
ESC
Exit
Select Item
Select Menu
-/Space
Change Values
Enter
Select Sub-Menu
F9
Setup
Defaults
F10
Save and Exit
▲
Main Advanced Security Power Boot
Info
Exit
Item Specific Help
Select Serial ATA/IDE
drive installed here.
[Auto]
The BIOS auto-types the
drive on boot time.
[None]
The drive is disabled.
Primary Master [TOSHIBA MK4025GAS-(PM)]
Type: [
Auto]
LBA Format
Total Sectors::
78140160
Maximum Capacity:
40008MB
Multi-Sector Transfers:
[16 Sectors]
LBA Mode Control:
[Enabled]
Transfer Mode:
[Multiword DMA 2]
Ultra DMA Mode:
[Disabled]
M a i n M e n u
