193
SECTION 2
SECTION 2
3. Expanding Memory
Preparing Necessary Items
You can additionally install the memory. For the memory upgrade
please refer back to your dealer.
Used to remove the screw securing the cover. Use a Philips
screwdriver that meets the size of the screw (M2.5). Using a
screwdriver of other size may cause damage to the screw head.
Memory (Expanded
RAM module)
Philips screwdriver
(Size: #1)
CAUTION
HOT
The memory slots are installed in close proximity to a part that gets very hot during
operation. To avoid burn, don’t install or remove memory immediately after turning off
the computer.
FAILURE
When installing or removing memory, don’t touch its terminals or ICs but hold its edges.
Also, be careful not to touch any components or terminals inside the computer. Touch-
ing a terminal with oily fingers could cause poor contact.
FAILURE
Memory is composed of parts very sensitive to static electricity, and it may be dam-
aged even by static built up in a human body. Before handling memory, always touch a
metal object with your hand to discharge static.
FAILURE
Before installing or removing memory, be sure to turn off the computer. Installing or
removing memory while the computer is in standby or hibernation mode could cause
damage to the computer or memory.
WARNING
ELECTRIC SHOCK
Before installing or removing memory, always turn off your computer and disconnect
the AC adapter from it, or you could get an electric shock.
SWALLOWING
The cover, cap, screw, etc., removed could choke babies and children if they are swal-
lowed accidentally. To avoid danger of suffocation, always keep them out of the reach
of babies and children.
In the event any of these items is swallowed, consult a doctor immediately.
Installing memory
LB15_Erg14i (193-203)
24/01/02, 1:52 PM
193
Summary of Contents for LifeBook C6659
Page 202: ......
