Fujitsu Lifebook E6150 User Manual Download

Page: 54 / 120

L i f e B o o k E S e r i e s – S e c t i o n T h r e e

IDLE MODE

Idle mode is one of the power management parameters.
When Idle mode is enabled, the CPU is put into low-
speed operation when there is no activity (keystroke,
pointer action, sound generation, video display change,
modem transmission or reception, etc.) on your Life-
Book for 16 seconds. Any activity will cause the normal
operation to restart automatically. This feature is inde-
pendent of the Suspend/Resume modes.

STANDBY MODE

Standby mode is one of the power management parame-
ters. When Standby mode is activated, your LifeBook
puts the CPU in low-speed operation, shuts off the
display and turns off the hard drive when there is no
activity (keystroke, pointer action, sound generation,
video display change, modem transmission or reception,
etc.) on your LifeBook for the user selected time-out
period. Any activity will cause your LifeBook to return
to normal operation automatically. This feature is inde-
pendent of the Power and Suspend/Resume button.

DISPLAY TIMEOUT

The Video Timeout is one of the power management
parameters. This feature saves power by turning off the
display if there is no keyboard or pointer activity for the
user selected timeout period. Any keyboard or pointer
activity will cause the display to restart automatically.
This feature is independent of the Power and Suspend/
Resume button and can be enabled and disabled in
Windows and BIOS setup utility.

(See BIOS Setup Utility

on page 41 for more information)

HARD DISK TIMEOUT

The Hard Disk Timeout is another one of the power
management parameters. This feature saves power by
turning off the hard drive if there is no hard drive
activity for the user selected timeout period. Any
attempt to access the hard drive will cause it to restart
automatically. This feature is independent of the Power
and Suspend/Resume button and can be enabled and
disabled in Windows and BIOS setup utility.

(See BIOS

Setup Utility on page 41 for more information)

WINDOWS 98 SECOND EDITION POWER
MANAGEMENT

Power Management

The Power Management icon located in the Windows 98
Second Edition Control Panel allows you to configure
some of the power management settings. For example,
you can use the Power Management to set the timeout
values for turning off the display and hard disks whether
you are running the LifeBook on battery power or one of
the adapters.

(See Pre-Installed Software on page 34 for

more information)

The settings may also be changed in

the BIOS.

(See BIOS Setup Utility on page 41 for more

information)

ACPI and Windows 98 Second Edition

Short for Advanced Configuration & Power Interface, a
power management specification developed by Intel,
Microsoft, and Toshiba. ACPI, which is part of the
Windows 98 Second Edition operating system, enables
the operating system to control the amount of power
given to each device attached to the computer. With
ACPI, the operating system can turn off peripheral
devices, such as the CD-ROM player, when it is not in
use. Due to ongoing industry development of ACPI
technology, we have configured your LifeBook to APM
(Advanced Power Management) mode.

P O I N T

Save-to-Disk mode requires allocating a significant
amount of hard drive capacity for saving all system
memory, which reduces your usable disk space. When
you purchase your LifeBook it will have space allocated
for the memory installed. If you upgrade the original
system by adding a memory upgrade module without
changing the size of your Save-to-Disk allocation you
will get an error message when you try to activate
Save-to-Disk mode and it will not work. Use the
PHDISK Utility to increase the size of the Save-to-Disk
file, SAVE2DSK.BIN. You can download the Save-to-
Disk File Allocation information from our Web site at

www.8fujitsu.com. I

f you need help, contact your

support representative for recommendations.