78
- Memory Upgrade Module
7
Insert the memory upgrade module at a 45° angle
. Press the connector edge of the module firmly
down and into the connector until it lodges under the retaining clip. You’ll hear a click when it is properly in place.
8
Replace the cover and reinstall the screws.
Removing a Memory Upgrade Module
1
Perform steps 1 through 4 of Installing a Memory Upgrade Module.
2
Pull the clips sideways away from each side of the memory upgrade module at the same time.
3
While holding the clips out, remove the module from the slot by lifting it up and pulling it away from your
notebook. Store the memory upgrade module in a static guarded sleeve.
4
Replace the cover and reinstall the screws.
Figure 23. Opening the Memory Compartment
T
HE
MEMORY
UPGRADE
MODULE
IS
NOT
SOMETHING
YOU
ROUTINELY
REMOVE
FROM
YOUR
NOTEBOOK
.
O
NCE
IT
IS
INSTALLED
,
YOU
CAN
LEAVE
IT
IN
PLACE
UNLESS
YOU
WANT
TO
CHANGE
SYSTEM
MEMORY
CAPACITY
.
