62
- Lithium ion Battery
1
Have a charged battery ready to install.
2
Shut down your notebook and disconnect the AC adapter.
3
While pushing the battery lock away from the battery, slide the battery latch towards the center of the system.
Lift the battery out of the bay at the lift point.
4
Insert a new battery into the bay, and press it down so that the latches click into place.
5
Plug in the AC adapter and turn the power on.
Hot-swapping Batteries
To hot-swap batteries in your battery bay follow these easy steps:
1
Plug an AC Adapter into the system and connect it to a power outlet.
2
While pushing the battery lock away from the battery, slide the battery latch towards the center of the system.
Lift the battery out of the bay at the lift point.
3
Insert a new battery into the bay, and press it down so that the latches click into place.
4
Turn the power on.
B
E
SURE
TO
PLUG
IN
AN
AC A
DAPTER
PRIOR
TO
REMOVING
THE
BATTERY
.
T
HERE
IS
NO
BRIDGE
BATTERY
PRESENT
TO
SUPPORT
THE
SYSTEM
WHILE
THE
BATTERY
IS
BEING
REPLACED
. I
F
YOU
DO
NOT
USE
AN
AC A
DAPTER
YOU
WILL
LOSE
ANY
UNSAVED
FILES
.
I
F
THE
L
ITHIUM
ION
BATTERY
CONNECTOR
IS
NOT
FULLY
SEATED
,
YOU
MAY
NOT
BE
ABLE
TO
USE
YOUR
NOTEBOOK
OR
CHARGE
YOUR
BATTERY
.
