Fujitsu Lifebook E8010 User Manual Download

Page: 41 / 124

G e t t i n g S t a r t e d

HIBERNATION (SAVE-TO-DISK) FEATURE

The Hibernation feature saves the contents of your
LifeBook notebook’s system memory to the hard drive as
a part of the Suspend/Resume mode. You can enable or
disable this feature.

Enable or Disable the Hibernation Feature

The default settings is not enabled. To enable or disable
the Hibernation feature follow these easy steps:

1. From the

Start

menu, select

Settings

, and then select

Control Panel

2. From the

Control Panel

select

Power Options

3. Select the

Hibernation

tab. Select the box to enable

or disable this feature.

Using the Hibernation Feature

1. From the

Start

menu, select

Settings

, and then select

Control Panel

2. From the

Control Panel

select

Power Options

3. Select the

Advanced

tab. Select

Hibernate

from the

pull down menu for Power buttons.

DISPLAY TIMEOUT

The Video Timeout is one of the power management
parameters. This feature saves power by turning off the
display if there is no keyboard or pointer activity for the
user selected timeout period. Any keyboard or pointer
activity will cause the display to restart automatically.
This feature is independent of the Power/Suspend/
Resume button and can be enabled and disabled in
Windows and BIOS setup utility. (See BIOS Setup Utility
on page 29 for more information)

HARD DISK TIMEOUT

The Hard Disk Timeout is another one of the power
management parameters. This feature saves power by
turning off the hard drive if there is no hard drive
activity for the user selected timeout period. Any
attempt to access the hard drive will cause it to restart
automatically. This feature is independent of the Power/
Suspend/Resume button and can be enabled and
disabled in Windows and BIOS setup utility. (See BIOS
Setup Utility on page 29 for more information)

WINDOWS POWER MANAGEMENT

Power Management

The Power Management icon located in the Windows
Control Panel allows you to configure some power
management settings. For example, you can use Power
Management to set the timeout values for turning off the
display and hard disks whether you are running the
notebook on battery power or one of the adapters. The
settings may also be changed in the BIOS. (See BIOS
Setup Utility on page 29 for more information)

RESTARTING THE SYSTEM

If your system is on and you need to restart it, be sure
that you use the following procedure.

1. Click the

Start

button, and then click

Shut Down

2. Select the

Restart

option from within the Windows

Shut Down dialog box.

3. Click

to restart your notebook. Your notebook

will shut down and then reboot.

POWER OFF

Before turning off the power, check that the Hard Drive,
optical drive, PC Card, and Floppy Disk indicators are
all Off. (See figure 2-3 on page 6). If you power-off while
accessing a disk or PC Card there is a risk of data loss. To
ensure that the notebook shuts down without error, use
the Windows shutdown procedure.

Using the correct procedure to shut down from Windows
allows your notebook to complete its operations and turn
off power in the proper sequence to avoid errors. The
proper sequence is:

1. Click the

Start

button, and then click

Shut Down

Turn Off Computer

2. Select the

Shut Down

option from within the

Windows Shut Down dialog box.

3. Click

to shut down your notebook.

If you are going to store your notebook for a month or
more see Care and Maintenance Section.

Turning off your notebook without exiting
Windows, or turning it on within 10
seconds of being shut off may cause an
error when you start the next time.

Be sure to close all files, exit all
applications, and shut down your
operating system prior to turning off the
power. If files are open when you turn the
power off, you will lose any changes that
have not been saved, and may cause disk
errors.

E Series.book Page 33 Friday, May 14, 2004 1:25 PM