![background image](http://html.mh-extra.com/html/fujitsu/lifebook-m2011/lifebook-m2011_user-manual_119171053.webp)
53
- Lithium ion Battery
Cold-swapping Batteries
1
Have a charged battery ready to install.
2
Shut down your system and disconnect the AC adapter.
3
Lift the display enough to pull the display latch from the slot.
4
Press the battery release latches to open the compartment.
5
Remove the battery from the compartment.
6
Slide the new battery into the compartment.
7
Close the compartment and the battery release latches will click into place.
8
Plug in the AC adapter and turn the power on.
Hot-swapping Batteries
To hot-swap batteries in your battery compartment follow these easy steps:
1
Close any open files and put your system into Standby mode.
2
Connect an AC adapter or Auto/Airline power adapter to provide power to the system.
3
Lift the display enough to pull the display latch from the slot.
4
Press the battery release latches inward to open the compartment.
5
Remove the battery from the compartment.
6
Slide the new battery into the compartment.
7
Close the compartment and the battery release latches will click into place.
8
Press the Suspend/Resume button to return your system to normal operation
.
B
E
SURE
TO
PLUG
IN
AN
AC A
DAPTER
PRIOR
TO
REMOVING
THE
BATTERY
.
T
HERE
IS
NO
BRIDGE
BATTERY
PRESENT
TO
SUPPORT
THE
SYSTEM
WHILE
THE
BATTERY
IS
BEING
REPLACED
. I
F
YOU
DO
NOT
USE
AN
AC A
DAPTER
YOU
WILL
LOSE
ANY
UNSAVED
FILES
.