background image

13

Miscellaneous Configurations Submenu of the Advanced Menu

The Miscellaneous Configurations submenu provides options for enabling or disabling the power button and the 
Wake Up On LAN feature, and setting the volume.

Figure 9.  Miscellaneous Configurations Submenu

Table 9: Fields, Options and Defaults for the Miscellaneous Configurations Submenu of Advanced Menu

Menu Field

Options

Default

Description

Power Button:

Disabled

Power Off

[Disabled]

Selecting Disabled disables the power button. Selecting Power Off allows you to 
turn off system power with the power button.

Wake up on LAN:

Disabled

Enabled

[Disabled]

Select Enabled to allow the system to wake up when the internal LAN device 
receives a specific signal while powered off. Select Disabled to disable the 
feature.

Volume Setting:

Off

Minimum

Middle

Maximum

[Middle]

Selects the initial volume setting for the system.

F1

 Help

ESC

 Exit

Select Item

Select Menu

-/Space

Enter

F9 

Setup Defaults

F10

  Save and Exit

Change Values

Select   Sub-Menu

Item Specific Help

Configures the power

button.

*ACPI OS ignores this

setting.

Miscellaneous Configurations

Power Button: 

Wake up on LAN:

Volume Setting:

 [Disabled]

 [Disabled]

 [Middle]

Phoenix SecureCore(tm) Setup Utility

                  

Advanced

    

A d v a n c e d   M e n u

Summary of Contents for Lifebook MH380























Reviews: