background image

17

Hard Disk Security Submenu of the Security Menu

The Hard Disk Security submenu is for configuring hard disk security features.

Figure 12.   Hard Disk Security Submenu

Table 12: Fields, Options and Defaults for the Hard Disk Security Submenu of the Security Menu

Menu Field

Options

Default

Description

Drive0 Password Is:

___

Clear

Display-only. Default is Clear. When the Drive0 Password has been set, the 
field changes to Set. When this password is set, the primary hard disk drive 
cannot be used in another system unless the password is entered.

Set Drive0 Password

___

[Enter]

Sets, changes or cancels the Drive0 Password. The Drive0 Password may be up 
to seven characters long and must include only letters or numbers (no sym-
bols). Passwords are NOT case-sensitive. When a Drive0 Password is set, it 
must be used to access the hard drive if it is used in another system. Note that 
the password will not take effect until the system has been rebooted.

Password Entry on Boot:

Disabled

Enabled

[Enabled]

When set to disabled, entry of a Hard Disk Password is not required before OS 
boot. (The hard disk is still password-protected without password entry.)

F1

 Help

ESC

 Exit

Select Item

Select Menu

-/Space

Enter

F9 

Setup Defaults

F10

  Save and Exit

Change Values

Select   Sub-Menu

Item Specific Help

Hard Disk Security

 Drive0 Password Is: 

  Clear

 Set Drive0 Password 

  [Enter]

 

 Password Entry on Boot:   [Enabled]

 

 

 

 

 

 

 

   

Phoenix SecureCore(tm) Setup Utility

Info    System    Advanced     

Security 

    Boot      Exit

    

S e c u r i t y   M e n u

Summary of Contents for Lifebook MH380























Reviews: